User Reported working SD cards (updated: 3rd October 2022)Īll modern UHS-I U1 and U3 cards will generally work ok. IPod is now ready to restore & sync using iTunes. Slide battery cable in to the connector and push down the black latch to lock the ribbon in place. Place supplied foam pad on to the chipset, use both if fitting in to a thick caseback. Install iFlash-Quad into iPod, making sure the ribbon is fully home and the black bar is locked down. Install MicroSD card(s) in to the iFlash-Quad, If not using 4 MicroSD cards then load from slot uSD1 up. iPod is ready to accept the iFlash board. Remove all rubber bumpers and strips from the iPods if any remain after the HDD is removed. Gently lift the black bar to release the ribbon from the HDD. Rest the front and back side by side, be careful to not cause too much stress on the headphone ribbon. I suggest watching some iPod opening videos on the internet.īefore pulling the case apart, release the battery cable – lift the black lock bar -or- gently using even pressure pull up the battery ribbon away from the connector. Using suitable tools, release the holding clips, making your way around the case till it opens.
0 kommentar(er)
